FibreCode Documentation & Guides
Welcome to the official technical documentation and guides hub for FibreCode Automotive Ethernet and Industrial Single Pair Ethernet (SPE) devices. Here you will find step-by-step guides for driver installation, network configuration, throughput testing, and register-level PHY diagnostics.
Recommended Workflow
To get started with your FibreCode adapter, follow these three core steps:
- Broadway2 Driver & Software Setup: Install the host package. Windows systems require the Broadway CDC-ECM installer; Linux includes native kernel support via cdc_ether.
- Static IP Configuration: Set up a static IPv4 address on your network adapter for direct point-to-point communication.
- Ping Link Verification: Test the physical link using ping, benchmark throughput with iperf3, or inspect device parameters with FC-Control.
Available Guides
Getting Started
Network & Diagnostics
Control & Tools
Raw Layer-2 & StreamTo
Supported Technologies & Hardware
100BASE-T1
Automotive EthernetIEEE 802.3bw standard for 100 Mbit/s full-duplex communication over a single twisted pair (SPE) cable up to 15 meters. Designed for automotive in-vehicle networks and ECU communication with support for configurable Master/Slave clock roles, OPEN Alliance TC10 sleep/wake-up, standard CDC-ECM network integration, and high-performance packet streaming.
10BASE-T1L
Industrial SPEIEEE 802.3cg standard for 10 Mbit/s full-duplex communication over a single twisted pair (SPE) cable up to 1000 meters. Designed for industrial automation and field device connectivity with support for long-reach point-to-point links, configurable PHY modes, standard CDC-ECM network integration, and high-performance packet streaming.