TC10 – 100BASE-T1 Sleep/Wakeup using real ECUs

Preparations #

Download and start PHY Control NXP as described here: PHY Control NXP

Also configure as described here: TC10 – 100BASE-T1 SLEEP/WAKEUP USING PHY CONTROL NXP

Demo setup with real ECU #

Overview #

For this simple example we are using 1x FC612 and 1x FC401 connected to ECU on same host, each Stick with own PHY Control NXP instance

Start PHY control NXP twice and select connected adapters

Sleep request #

Send SLEEP-REQUEST to send device in sleep mode

Wakeup trigger #

So successfully wake device in sleep state, disable AutoOp

set PHY in STANDBY mode

set PHY in NORMAL mode

Then send TRIGGER_WAKE to wake other device

Now enable AutoOp to bring back link