Skip to content
FibreCode Docs
Menu Close
100BASE-T1

100BASE-T1

13
  • Setup Windows Driver
  • Stream H.264 video on AVTP using StreamTo
  • Record raw data to pcapng-file using StreamTo
  • Play pcapng using StreamTo
  • Configure Windows Network
  • Configure Linux Network
  • Network Basics – Ping
  • Performance measurement with iperf3
  • Register Access – PHY Control NXP (100BASE-T1)
  • 100BASE-T1 Product Comparison
  • Setup Linux Driver
  • Read serial number and other data with FC-Control
  • TC10 – 100BASE-T1 Sleep/Wakeup using PHY Control NXP
Raw Layer2

Raw Layer2

5
  • Stream H.264 video on AVTP using StreamTo
  • Record raw data to pcapng-file using StreamTo
  • Play pcapng using StreamTo
  • Register Access – PHY Control NXP (100BASE-T1)
  • Register Access – PHY Control ADI (10BASE-T1L)
10BASE-T1L

10BASE-T1L

12
  • Setup Windows Driver
  • Stream H.264 video on AVTP using StreamTo
  • Record raw data to pcapng-file using StreamTo
  • Play pcapng using StreamTo
  • Configure Windows Network
  • Configure Linux Network
  • Network Basics – Ping
  • Performance measurement with iperf3
  • Register Access – PHY Control ADI (10BASE-T1L)
  • 10BASE-T1L Product Comparison
  • Setup Linux Driver
  • Read serial number and other data with FC-Control
Network

Network

7
  • Setup Windows Driver
  • Configure Windows Network
  • Configure Linux Network
  • Network Basics – Ping
  • Performance measurement with iperf3
  • Register Access – PHY Control ADI (10BASE-T1L)
  • Setup Linux Driver
Control

Control

3
  • Register Access – PHY Control NXP (100BASE-T1)
  • Register Access – PHY Control ADI (10BASE-T1L)
  • TC10 – 100BASE-T1 Sleep/Wakeup using PHY Control NXP

FC621

  • Read serial number and other data with FC-Control
  • Setup Linux Driver
  • 10BASE-T1L Product Comparison
  • Register Access – PHY Control ADI (10BASE-T1L)
  • Performance measurement with iperf3
  • Network Basics – Ping
  • Configure Linux Network
  • Configure Windows Network
  • Setup Windows Driver