---
title: Configure Windows Network
description: "## Setup Windows Driver Go to: [**SETUP WINDOWS DRIVER**](https://docs.fibrecode.com/docs/setup-windows-driver/) ## Configure Network Plug in FC602 USB 100BASE-T1 Stick to your PC ![](https://docs.fibrecode.com/wp-content/uploads/2022/08/plug-in_FC602.png) Go to network settings and find FC602 Network device ![](https://docs.fibrecode.com/wp-content/uploads/2022/08/setip_FC602_windows_1.png) Open TCP/IPv4 settings ![](https://docs.fibrecode.com/wp-content/uploads/2022/08/setip_FC602_windows_2.png) Set IP address and…"
url: "https://docs.fibrecode.com/docs/configure-windows-network/"
updated: "2022-09-29"
category: "100BASE-T1"
tags:
  - FC602
  - FC621
---

# Configure Windows Network

## Setup Windows Driver

Go to: [**SETUP WINDOWS DRIVER**](https://docs.fibrecode.com/docs/setup-windows-driver/)

## Configure Network

Plug in FC602 USB 100BASE-T1 Stick to your PC

![](https://docs.fibrecode.com/wp-content/uploads/2022/08/plug-in_FC602.png)

Go to network settings and find FC602 Network device

![](https://docs.fibrecode.com/wp-content/uploads/2022/08/setip_FC602_windows_1.png)

Open TCP/IPv4 settings

![](https://docs.fibrecode.com/wp-content/uploads/2022/08/setip_FC602_windows_2.png)

Set IP address and Subnet mask

![](https://docs.fibrecode.com/wp-content/uploads/2022/08/setip_FC602_windows_3.png)

Your FC602 USB 100BASE-T1 Stick is now configured

Using FC612 USB 100BASE-T1 Stick Raw will NOT install a standard network device. Instead, Broadway2-API comes with extended functions to access Ethernet Raw packets directly. Refer to our [**100BASE-T1 PRODUCT COMPARISON**](https://docs.fibrecode.com/docs/100base-t1-product-comparison/) for more details.